Part Number Hot Search : 
576MH 3844A 1N341 78M24C FRF9150D MCT9001 MCT9001 WSPBF
Product Description
Full Text Search
 

To Download PLED60W-108-C0550-XX Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  constant voltage versions - product specifcations model number output voltage (vdc 5%) output current range (ma) max. output power (w) max effciency pled60w-012 ? 12 1563-5000 60 84% pled60w-015 15 1250-4000 60 84% pled60w-020 20 938-3000 60 84% pled60w-024 ? 24 783-2500 60 85% pled60w-027 27 700-2250 60 85% pled60w-036 36 525-1670 60 86% pled60w-042 42 448-1450 60 86% pled60w-048 48 390-1250 60 88% pled60w-054 54 350-1200 60 88% pled60w-072 72 263-850 60 90% pled60w-108 108 175-550 60 90% pled60w-166 166 113-360 60 91% pled60w-214 214 88-280 60 91% class 2: us/canada us only -xx indicates dimming options are available. see options at left. blank = fxed current output electrical specifcations input voltage range: 100-277 vac nom. (90-305 v min/max) input over-voltage: can endure 320vac for 48 hrs, 350vac for 2 hrs frequency: 50/60 hz nom. (47-63 hz min/max) power factor: >0.90 @ 75-100% load, 100-277vac inrush current: <50.0 amps max @ 277vac, cold start 25oc input current: 0.80 amps max maximum power: 60w current regulation: 3% over input line variation load regulation: 4% thd: <_ 20% @ 75-100% load, 100-277vac ripple & noise: (vpk-pk) 5% vo max @ 20 mhz bw, full load output in parallel with 0.1 f ceramic & 10 f electrolytic ripple: (ipk-pk) 5% io max @ 20 mhz bw, full load output in parallel with 0.1 f ceramic & 10 felectrolytic. 120 hz component (flicker free) start-up time: 200ms typical @ full load, 120vac/60hz (1000ms max) leakage current: 0.28 ma max @ 120vac, 0.78 ma max @ 277vac hold up time: 40ms typical @ full load, 277vac output protection: over-voltage, over-current, and short circuit with auto-recovery environmental specifcations minimum starting temp: -30oc maximum case temp. 90c storage temperature: -40oc to +85oc humidity: 5% to 95% cooling: convection vibration frequency: 5 to 55 hz/2g, 30 minutes sound rating: class a impact resistance: 1g/s mtbf: 474,000 hours at full load and 40oc ambient conditions per mil-217f notice 2 emc: fcc 47cfr part 15 class b compliant weight: 19 oz. (538 g) pled60w seriesC fixed output & dimmable flicker-free led drivers constant current & constant voltage with isolation black magic thermal advantage? aluminum housing ? smallest footprint driver for this wattage ? total power: 60 watts ? input voltage: 100-277 vac nom. ? ul dry & damp location rated ? ip66 & nema6 ? ul type hl rated for hazardous locations ? ul sign components manual models available rev 9-11-15 ordering options: -d: 0-10v & resistance dimmable models dim 100-10%. two extra wires on the output side (+purple/-gray). compatible with most quality 0-10v wall dimmers. see page 3. -d3: 3-wire dimmable models dim 100-10%. three extra wires on the output side (yellow/purple/gray). compatible with potentiometer dimming. see page 3. -pd: pwm dimmable models. two extra wires on the output side(+purple/-gray). dims via positive 10% to 100% duty cycle, 200hz to 1khz, 0-10v pulse. see page 4. e332160 sign components manual constant current versions - product specifcations model number output current (ma 3%) output voltage range (vdc) max. output power (w) max effciency pled60w-214-c0280- xx 280 72-214 60 91% pled60w-166-c0360- xx 360 56-166 60 91% pled60w-108-c0550- xx 550 36-108 60 90% pled60w-072-c0850- xx 850 24-72 60 90% pled60w-054-c1100- xx 1100 18-54 60 88% pled60w-048-c1250- xx 1250 16-48 60 88% pled60w-042-c1450- xx 1450 14-42 60 86% pled60w-036-c1670- xx 1670 12-36 60 86% pled60w-027-c2250- xx 2250 9-27 60 85% pled60w-024-c2500- xx 2500 8-24 60 85% pled60w-020-c3000- xx 3000 7-20 60 84% pled60w-015-c4000- xx 4000 5-15 60 84% pled60w-012-c5000- xx 5000 4-12 60 84% ? indicates s.a.m. specifcations subject to change without notice. note: led drivers are designed and intended to operate led loads only. non-led loading may be outside the specifed design limits of our led drivers, and therefore cannot be covered by any warranty. if you desire to use our led drivers to operate non-led loads please contact us to discuss compatibility. thomas research products ? 1225 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com
pg 2 of 4 dimensions - in [mm] input black (acl) white (acn) green/yellow (gnd) ouput red (v+) blue (v-) dimming purple (dim+) gray (dim-) 12.0 min [ 305 min ] 12.0 min [ 305 min ] 2.6 [ 65 ] 5.51 0.047 [ 140.0 1.2 ] 5.91 [ 150 ] 5.1 [ 130 ] 2.33 [ 59.2 ] 1.34 [ 34 ] 0.31 [ 8 ] 0.236 [ 6 ] 0.236 [ 6 ] 0.16 [ 4 ] 1.47 [ 37.3 ] 0.71 [ 18 ] 1.165 [ 29.6 ] 2.240.12 [ 57.03 ] 2.240.12 [ 57.03 ] 0.390.04 [ 101 ] 0.390.04 [ 101 ] tc = 90c max wire specs: input leads: 18 awg, rated 600 v, 105c, min. output leads: 18 awg, rated 300 v, 105c, min. dimming leads: 22 awg, rated 300 v, 105c. all wires are stranded with solder dipped ends. ul conditions of acceptability 40% load pf power factor / load 60% 80% 100% 40% load thd thd / load 60% 80% 100% 1 20v a c 230vac 277vac 1 20v a c 230vac 277vac 0.700 0.750 0.900 0.850 0.800 0.950 1.000 0% 15% 10% 5% 25% 20% 30% typical efficiency / load 75% 70% 80% 85% 90% 100% 95% normalized output voltage efficiency 40% 60% 80% 100% 1 20v a c 230vac 2 77v a c 50 case hotspot temperature (c) lifetime (khrs) lifetime / case temperature full load @ 120vac 0 80 120 130 100 20 40 60 70 110 90 10 30 50 140 55 60 65 70 75 80 85 90 safety and emc compliance part 3-3: limitation of voltage changes, voltage fuctuations and ficker . pled60w series note: life calculations are based on reliability with confdence using a 90% confdence level and <5% failure rate. at a confdence level of 90% it is expected that <5% of the parts will fail at the rated life provided. (failure is defned as a driver drifting outside specifcation, rather than fail to operate) thomas research products ? 1225 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com ssl solutions faster than the speed of light ?
pg 3 of 4 notes: 1. 0-10v dimmable version comes with an extra two wires +purple/-gray on the output side. 2. compatible with most 0-10v wall slide dimmers and direct 0-10v analog signal. recommended dimmer is leviton ip710 or equivalent 3. 0-10v dimmable version is not intended to dim below about 5% @ 0v or 10% @ 1.0v 4. 0-10v dimmable version output will be 100% with purple/gray open and minimum with purple/gray shorted. 5. 3-wire dimmable drivers come with three wires on the output side (yellow/purple/gray). parameters minimum typical maximum 10v output, yellow wire 9.2v 10.0v 10.8v 10 output source current, yellow wire 0ma 10ma absolute voltage range on 0-10v (+) purple wire -2.0v +15v source current out of 0-10v purple wire 0ma 2ma dim (+) purple ip710 wall dimmer pled60w-xxx-cxxxx-d dim (-) gray 3-wire dimming typical circuit pled60w-xxx-cxxxx-d3 20k potentiometer 10v output (yellow) 0-10v input (purple) return (gray) (dimmer must be current-sink type control) typical dimming circuit 0v 1v 2v 3v 4v 5v 6v 7v 8v 9v 10v d i mmi n g i n p u t ( v dc) o u t put c u rre n t / 0 - 1 0 v dc d i mmi ng i nput 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 100 outpu t cu rr ent % "-d" and "-d3" options: 0-10vdc and resistance dimming pled60w series thomas research products ? 1225 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com ssl solutions faster than the speed of light ?
pg 4 of 4 "-pd" option: pwm dimming pwm in pled60w-xxx-cxxxx-pd pwm (+) purple pwm (-) gray pwm positive dimming typical circuit parameters minimum typical maximum absolute maximum voltage range on pwm input (purple wire) -2.0v 10v +15v input low level voltage range (purple wire) -2.0 0v +5.5v input high level voltage range (purple wire) +9.0 10v 15v sink current into pwm input (purple wire) 0ma 1.2ma pwm input signal frequency 500hz 1500hz pwm input signal positive duty cycle 0% 10-90% 100% notes: 1. pwm dimmable version comes with an extra 2 wires +purple/-gray on the output side. 2. below 10% duty cycle proper dimming operation is not assured. unit is not intended to turn off at <10% duty cycle. 3. pwm dimmable version output will be 100% with purple/gray open and minimum with purple/gray shorted. 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% positive duty cycle o u t put c u rre n t / 1.0 khz positive duty cycle 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 100 outpu t cu rr ent % pled60w series thomas research products ? 1225 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com ssl solutions faster than the speed of light ?


▲Up To Search▲   

 
Price & Availability of PLED60W-108-C0550-XX

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X